Fiber
Making textiles more slippery or less slippery
When weaving cloth at high speed, fibers may rub against each other resulting in damage or burning. MORESCO's liquid paraffin is used to avoid such issues by making fibers more slippery so as to reduce friction. Our hot melt adhesives are used in anti-slip backings for bath mats. MORESCO products are widely used in the textile industry, with our high temperature lubricating oils, for example, used on dye drying lines and textile print transfer machines.
Liquid paraffin
MORESCO WHITE
Product No. | kinematic viscosity mm2/s (40℃) |
mean molecular weight |
density g/cm3 |
Flash point ℃ | Appearance | Product Information |
---|---|---|---|---|---|---|
P-55 | 9.62 | 300 | 0.838 | 176 | ||
P-70 | 12.56 | 323 | 0.843 | 184 | ||
P-80 | 14.72 | 335 | 0.846 | 190 | ||
P-100 | 19.04 | 365 | 0.85 | 196 | ||
P-200 | 39.3 | 430 | 0.861 | 220 | ||
P-350P | 67.65 | 483 | 0.868 | 250 |
Hydraulic fluid
HYDOL X-series
Product No. | kinematic viscosity mm2/s (40℃) |
Appearance | merit & use | pH | Pour point ℃ | Product Information |
---|---|---|---|---|---|---|
- | General-purpose hydraullic fluid. |
HYDOL AW-series
Product No. | kinematic viscosity mm2/s (40℃) |
Appearance | merit & use | pH | Pour point ℃ | Product Information |
---|---|---|---|---|---|---|
- | Wear resistance hydraulic fluid. |
High vacuum pump oil
NEOVAC
Product No. | kinematic viscosity mm2/s (40℃) |
Flash point ℃ | merit & use | Color (ASTM) |
Vapor pressure Pa(Torr) (50℃) |
Product Information |
---|---|---|---|---|---|---|
MR-100 | 44 | 230 | Standard for small pump. | L0.5 | 1.3X10-2 or less (1X10-4) | リンク |
MR-200 | 71 | 256 | Standard for ratary pump. | L0.5 | 1.3X10-3 or less (1X10-5) | リンク |
MR-250 | 105 | 270 | Standard for large pump. | 0.5 | 1.3X10-3 or less (1X10-5) | リンク |
ST-200 | 76 | 252 | Improved sludge dispersion, heat and oxidation resistance. (Moisture suction is not supported) | L2.0 | 1.3X10-2 or less (1X10-4) | リンク |
MR-200A | 71 | 252 | Improved heat and oxidation. Moisture suction is supported. | L0.5 | 1.3X10-3 or less (1X10-5) | リンク |
MR-250A | 105 | 270 | Improved heat and oxidation. Moisture suction is supported. For large pump. | L0.5 | 1.3X10-3 or less (1X10-5) | リンク |
SO-M | 64 | 264 | Excellent heat and oxidation resistance. | L0.5 | 4X10-4 or less (3X10-6) | リンク |
SO-H | 95 | 285 | High viscosity than SO-M. | L0.5 | 4X10-5 or less (3X10-7) | リンク |
SA-L | 32 | 240 | Low viscosity than SA-M. | L0.5 | 4X10-4 or less (3X10-6) | リンク |
SA-M | 64 | 260 | Improved oxidation stability of SO-M. | L0.5 | 4X10-4 or less (3X10-6) | リンク |
SA-H | 95 | 280 | Improved oxidation stability of SO-H. | L0.5 | 4X10-5 or less (3X10-7) | リンク |
SX | 22 | 235 | For surface treatment equipment. (vapor deposition, sputter, heat treatment) | リンク | ||
SY | 26 | 240 | For surface treatment equipment. (vapor deposition, sputter, heat treatment) | リンク | ||
ME-250 | 13 | 188 | For surface treatment equipment. (vapor deposition, sputter, heat treatment) | リンク | ||
DB-12 | 24 | 212 | For surface treatment equipment. (vapor deposition, sputter) | リンク | ||
EP-83 | 84 | 260 | For gear lubrication of a mechanical booster pump. | L1.0 | 1.3X10-3 or less (1X10-5) | - |
GREASE | Sealing grease of vacuum equipment. |
MORESCO-EXCELLOL
Product No. | kinematic viscosity mm2/s (40℃) |
mean molecular weight |
Flash point ℃ | merit & use | Vapor pressure Pa(Torr) (25℃) |
Ulrimate pressure | Product Information |
---|---|---|---|---|---|---|---|
54 | 290 | 約446 | 300 | For precision analysis equipment. (electron microscopy, mass spectrometer) | 7X10-9 or less (5X10-11) |
Hot melt adhesive
MORESCO-MELT
Product No. | merit & use | Main ingredient | Color | Packing | Product Information |
---|---|---|---|---|---|
TN-624Z | For non-woven fabric/resin, difficulty adhesion | Pale yellowish white | Excell coat | ||
TN-210Z | Bond of the rock wool and glass wool to PE film (spray coating) | Yellow | Excell coat |
High temperature lubricating oils and greases
About High temperature lubricating oils and greases
MORESCO HILUBE
Product No. | density g/cm3 |
Flash point ℃ | Appearance | merit & use | ISO viscosity grade | Consistency No. | Product Information |
---|---|---|---|---|---|---|---|
L-320 | 0.896 | 276 | Pale yellow | High temperature region of ~271℃. For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). | 320 | リンク | |
L-560 | 0.896 | 272 | Pale yellow | High temperature region of ~272℃. For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). | 560 | リンク | |
L-830 | 0.897 | 231 | Pale yellow | High temperature region of ~273℃. For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). | 830 | リンク | |
LM-320 | 0.885 | 262 | Pale yellow | Middle-high temperature region of 201℃ or less.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film | 320 | - | |
LM-560 | 0.888 | 270 | Pale yellow | Middle-high temperature region of 202℃ or less. For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film | 560 | - | |
LE-320 | 0.918 | 268 | Pale yellow | High temperature region of ~271℃. For food machinery (Tunnel oven), textile machinery (heat setter), biaxial stretching machine (film tenter). | 320 | リンク |