Iron and steel

Protecting the key industry at the heart of all manufacturing industries from fire

Iron and steel

Steel has a melting temperature of over 1,500°C. It therefore goes without saying that there is a constant danger of fire in steel foundries, where the material is refined, continuously cast, and rolled to create finished steel stock. MORESCO's HYDOL HAW, a fire resistant hydraulic fluid used in such foundries, is non-combustible even if exposed directly to flame, and protects the steel industry from fires. Our products are also widely used in equipment lubrication and metalworking.

 

Product List

Lubricant for hot forging

LUBCASTER

Product No. pH Specific gravity g/cm3 Appearance merit & use Product Information
F-20 approx 8.5 1.2 Light yellow transparent mucoid fluid Usable with high dilution by the high adhesion property, suitable to low temperature mold.
F-670 approx 9 1.15 Light yellow transparent mucoid fluid Applicable to wide range of shape, and also to high temperature mold.
F-500 approx 8.5 1.15 Light yellow transparent liquid fluid Balance the adhesion and low build up property .
F-550 approx 9 1.14 Light yellow transparent liquid fluid Balance lubricity and low build up property.
F-780 approx 9 1.20 Light yellow transparent mucoid fluid Excellent in high lubricity and easy for mold maintenance
F-870 approx 9 1.17 Light yellow transparent mucoid fluid Best Grade products with high lubricity even equal to Graphite type.

Cutting fluid

Oilwater RⅡ

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.061 None Turbidity pale yellow Suitable for difficult-to-cut materials and iron-based materials. Possible to use as an alternative to non-water-soluble cutting oil. Equivalent to A2-1

Synthetic type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.06 None Yellow Suitable for general-purpose cutting of cast iron and general steel. Equivalent to A2-1
- 1.04 None Pale yellow Suitable for heavy cutting of cast iron, general steel. Equivalent to A2-1

Emulsion type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 0.95 None Brown Emulsion. Anti-foaming type. Equivalent to A1-1
- General purpose emulsion type. Equivalent to A1-1
- 0.97 None Brown Microemulsion type. Improved stickness around the machine. Equivalent to A1-1

Soluble type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1 None Pale green Mainly suitable for processing of cast iron. Equivalent to A2-1
- 0.95 None Pale brown Mainly suitable for processing of aluminum and general steel. Equivalent to A2-1
- 0.97 None Brown For aluminum mainly. Especially improve the aluminum compatibility. Equivalent to A2-1

Chemical solution type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.05 None Yellow General-purpose type for grinding. Equivalent to A.3-1
- 1.07 None Pale yellow Low-pH type. Suitable for fragile materials. Equivalent to A.3-1

NEOCOOL CUTTINGSTAR

NEOCOOL

Hydraulic fluid

HYDOL

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
HAW 51 Red clear liquid Water-glycol hydraulic fluid with a flame-retardant and high lubricity. Available in a high-pressure area of 14-25MP discharge pressure. 10.2 -47.5 リンク
H-200 38 Red clear liquid Water-glycol hydraulic fluid with excellent performance balance.Performance in the discharge pressure less than 14MP. 10.2 -47.5 リンク
HAW-32 32 Red clear liquid Low-viscosity water-glycol hydraulic fluid. Suitable for use of machine tool. 10.2 -47.5 リンク

NEOLUBE

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
46G 44.5 Green clear liquid Undiluted type phosphoric acid ester-based hydraulic fluid. Lubricity of equal to or greater than the wear resistance hydraulic oil.

HYDOL X-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- General-purpose hydraullic fluid.

HYDOL AW-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- Wear resistance hydraulic fluid.

High vacuum pump oil

NEOVAC

Product No. kinematic viscosity
mm2/s
(40℃)
Flash point ℃ merit & use Color
(ASTM)
Vapor pressure
Pa(Torr) (50℃)
Product Information
MR-100 44 230 Standard for small pump. L0.5 1.3X10-2 or less (1X10-4) リンク
MR-200 71 256 Standard for ratary pump. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250 105 270 Standard for large pump. 0.5 1.3X10-3 or less (1X10-5) リンク
ST-200 76 252 Improved sludge dispersion, heat and oxidation resistance. (Moisture suction is not supported) L2.0 1.3X10-2 or less (1X10-4) リンク
MR-200A 71 252 Improved heat and oxidation. Moisture suction is supported. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250A 105 270 Improved heat and oxidation. Moisture suction is supported. For large pump. L0.5 1.3X10-3 or less (1X10-5) リンク
SO-M 64 264 Excellent heat and oxidation resistance. L0.5 4X10-4 or less (3X10-6) リンク
SO-H 95 285 High viscosity than SO-M. L0.5 4X10-5 or less (3X10-7) リンク
SA-L 32 240 Low viscosity than SA-M. L0.5 4X10-4 or less (3X10-6) リンク
SA-M 64 260 Improved oxidation stability of SO-M. L0.5 4X10-4 or less (3X10-6) リンク
SA-H 95 280 Improved oxidation stability of SO-H. L0.5 4X10-5 or less (3X10-7) リンク
SX 22 235 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
SY 26 240 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
ME-250 13 188 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
DB-12 24 212 For surface treatment equipment. (vapor deposition, sputter) リンク
EP-83 84 260 For gear lubrication of a mechanical booster pump. L1.0 1.3X10-3 or less (1X10-5) -
GREASE Sealing grease of vacuum equipment.

MORESCO-EXCELLOL

Product No. kinematic viscosity
mm2/s
(40℃)
mean
molecular
weight
Flash point ℃ merit & use Vapor pressure
Pa(Torr) (25℃)
Ulrimate pressure Product Information
54 290 約446 300 For precision analysis equipment. (electron microscopy, mass spectrometer) 7X10-9 or less (5X10-11)

High temperature lubricating oils and greases

MORESCO HILUBE

Product No. density
g/cm3
Flash point ℃ Appearance merit & use ISO viscosity grade Consistency No. Product Information
LE-150 0.917 272 Pale yellow High temperature region of ~270℃. For food machinery (Tunnel oven), textile machinery (heat setter), biaxial stretching machine (film tenter). 150 リンク
LE-320 0.918 268 Pale yellow High temperature region of ~271℃. For food machinery (Tunnel oven), textile machinery (heat setter), biaxial stretching machine (film tenter). 320 リンク
LE-560 0.919 254 Pale yellow High temperature region of ~272℃. For food machinery (Tunnel oven), textile machinery (heat setter), biaxial stretching machine (film tenter). 560 リンク
MO-150 0.902 278 Grayish black For food machinery (Tunnel oven), drying construction material and sludge of sewage (rotary kiln), gear box. 150 リンク
MO-320 0.904 272 Grayish black For food machinery (Tunnel oven), drying construction material and sludge of sewage (rotary kiln), gear box. 320
MO-560 0.903 262 Grayish black For food machinery (Tunnel oven), drying construction material and sludge of sewage (rotary kiln), gear box. 560
LS-150E 0.974 256 Yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). 150 -
LS-320E 0.978 256 Yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). 320 -
R-150 0.980 264 Pale yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). リンク
R-220 0.969 266 Pale yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). リンク

Grease

MORESCO HIGREASE

Product No. Product Information
UM-1 リンク